In Memoriam: Tai'lahr
OpenUru.org, along with the rest of the Mystonline community, is mourning the loss of Tai'lahr on October 16th, 2019.
Rest in Peace, friend.
Difference between revisions of "Tech Note - PhysX Version Incompatibility with CWE Client"
(→Resolution: Update to prefer 9.10.0513) |
m (moved Tech Note - PhysX Version Incompatability with CWE Client to Tech Note - PhysX Version Incompatibility with CWE Client: Correct spelling of title) |
(No difference)
| |
Latest revision as of 13:13, 7 January 2012
This Tech Note applies to:
Revision:
Additional Notes:
CWE client loops trying to install PhysX
Problem Description
When launching the client, a popup message advises that PhysX is missing or out of date and prompts you to install it. If you proceed with the installation it then enters a loop, continually trying to update PhysX.
Resolution
The original Myst Online: Uru Live (MOUL) client was built using the PhysX SDK v2.6.0 and the Ageia PhysX _Setup.exe downloaded with MOUL, MOULagain or MagiQuest Online only provides support for revisions up to 2.6.0. However the earliest SDK currently available from nVIDIA is v2.6.4, so builds of the CWE client using that SDK will require that the client PC upgrades the PhysX System Software (driver).
The client detects that the PhysX installation requires to be updated and runs the installer, "PhysX_Setup.exe". If that installer is the 2.6.0 version, then it will complete but the client will again detect that the installation is out of date and the process will repeat.
Users affected by this problem should download and run the PhysX System Software (9.10.0513) installer from the nVIDIA download site. [1] You may need to rename the file after download to "PhysX _Setup.exe" and place it in your client's installation folder (check with your server operator).
Caution: If you choose to use a version of PhysX older that version 9 you may find that you need to revert your PhysX installation back to the 2.6.0 version to use the Cyan MOULagain client.